Product ID:A/D HIGH HEAT ARGENT SILVER, 0702A33M
MSDS Date:09/22/1992
FSC:6850
NIIN:00N038892
MSDS Number: BRHQC

DEXTER CORP

31500 HAYMAN
HAYWARD, CA 94544
US

Emergency Phone: 510-471-7171

Info Phone: 510-471-7171

Preparer: J. TILLOTSON

Cage: 57294

DIVERSITY WATER TECHNOLOGIES INC

200 CHAGRIN FALLS, OH 44022 US

Telephone: 216-247-5000

Cage: 57294

7.1@20C

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <10%

OSHA PEL 100 PPM;125 STEL

ACGIH TLV: 100 PPM;125 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

9.5@20C

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 10-20%

OSHA PEL 300 PPM;400 PPM STEL

ACGIH TLV: 300 PPM

21@20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-20%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

8@20C

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: <10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ALUMINUM

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 32-33%

OSHA PEL 15 MG/M3(TDUST)

ACGIH TLV: 10 MG/M3(DUST)

3.4 POUNDS PER GALLON LESS

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE BY INHAL MAY CAUSE
IRRIT OF RESP TRACT, HDCH, DIZZ/DROW. SKIN/EYE CONT: IRRITANT TO
EYES & SKIN. CHRONIC: THOSE HAZ MATERIALS MAY AFFECT THE FOLLOWING
ORGANS: RESPIRATORY TRACT, CE NTRAL NERVOUS SYSTEM, KIDNEYS, LIVER,
CARDIAC SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:UNKNOWN AT THIS TIME.

First Aid:INHAL: REMOVE FROM EXPOSURE. EYE: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15 MINUTES. SKIN:
REMOVE CONTAMINATED CLOTHING AND WASH SKIN WITH SOAP AND WATER.
INGEST: DRINK WAT ER.

Flash Point Method:SCC
Flash Point:74.0F,23.3C
Lower Limits:0.90%
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS, VENTILATE AREA, & REMOVE W/INERT ABSORBANT &
NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT TAKE INTERNALLY. CONTRS SHOULD
BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQ IN EXCESS OF A FEW
INCHES.
Other Precautions:MAKE SURE DRUM IS COMPLETELY CLEANED PRIOR TO USE. DO
NOT FLAME CUT, BRAZE, OR WELD W/OUT NIOSH/MSHA APPROVED RESPIRATOR
OR APPROPRIATE VENTILATION.

Respiratory Protection:WHERE GEN DILUTION/LOC EXHAUST FAILS TO ADEQ
DILUTE TWA/PEL OF MATL, THEN NIOSH/MSHA APPRVD RESP PROT SHOULD BE
USED AS FOLLOWS: I/A/W 29CFR1910.134, USE NIOSH/MSHA APPRVD AIR
LINETYPE RESP/HOODS FOR ENCLSD & CONFINED AREAS. (SUPP DATA)
Ventilation:PROVIDE GEN DILUT/LOC EXHAUST VENT TO KEEP TWA AND LEL
BELOW ACCEPTABLE LIMITS AND TO REMOVE DECOMP PROD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
RESP PROT: NIOSH/MSHA APPROVED AIR PURIFYING RESPIRATORS MAY BE USED
FOR OTHER AREAS.

Boiling Pt:B.P. Text:>226F,>108C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:9.892

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES MAY CNTN CARBON MONOXIDE &
OXIDES OF NITROGEN. MAY PRDCE HAZ FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.